Public Resources Code 4290
These regulations have been prepared and adopted for the purpose of establishing minimum wildfire protection standards in conjunction with building, construction and development in State Responsibility Areas (SRA). These regulations shall become effective September 1, 1991. The future design and construction of structures, subdivisions and developments in State Responsibility Area (SRA) shall provide for basic emergency access and perimeter wildfire protection measures as specified in PRC 4290. These measures shall provide for emergency access; signing and building numbering; and vegetation modification. The fire protection standards contained within PRC 4290 shall specify the minimums for such measures.
County wide residential fire flow/sprinkler requirements
Public Resources Code Requirements Diagrams:
Turnout and Turnaround Diagrams
Gates, Roadway Widths and Vertical Clearance Diagrams
Curves, Addresses and One-Way Roads Diagrams
Determining Percentage of Slope on Your Driveway Reference Sheet
Public Resources Code 4291
To ensure continued maintenance of properties in conformance with the defensible space requirements outlines in PRC 4290 and to assure continued availability, access, and utilization of the defensible space provided during a wildfire, provisions for annual maintenance shall be included in the development plans and/or shall be provided as a condition of the permit, parcel or map approval. PRC 4291 is the law requiring annual defensible space be provided around all structures in, upon, or adjoining any mountainous area, forest-covered lands, brush-covered lands, grass-covered lands, or any land that is covered with flammable material.
Public Resources Code 4291 (Defensible space Requirements for all structures located within Butte County )
General Guidelines for Creating Defensible Space
Pre Fire Management Handout (defensible space, fire safe landscaping, fuel breaks etc.)
Butte County Improvement Standards
It is the purpose of the Improvement Standards to provide minimum standards to be applied to improvements and private works to be dedicated to the public and accepted by the County for maintenance or operation, as well as improvements to be installed within existing rights-of-way and easements. This is necessary in order to provide for coordinated development of required facilities to be used by and for the protection of the public.
Butte County Improvement Standards, Chapter 13, Fire Standards (2002)
State Responsibility Area
Pursuant to Public Resources Code (PRC) §4125-4128, the Board of Forestry and Fire Protection classifies all lands in the state for the purposes of determining areas in which the financial responsibility of preventing and suppressing wildfire is primarily the responsibility of the state. These lands are termed State Responsibility Area (SRA).
State Responsibility Area map for Butte County
Fire Hazard Severity Zone
Fire Hazard Severity Zones are geographical areas designated pursuant to California Public Resources Codes Sections 4201 through 4204 and classified as Very High, High, or Moderate in State Responsibility Areas or as Local Agency Very High Fire Hazard Severity Zones designated pursuant to California Government Code Sections 51175 through 51189.
The California Code of Regulations, Title 14, section 1280 entitles the maps of these geographical areas as “Maps of the Fire Hazard Severity Zones in the State Responsibility Area of California.”
Fire Hazard Severity Zone Map for Butte County